Biostratigraphy,Microfacies, Sedimentary Environments and Sequence Stratigraphy of the Late Devonian–Carboniferous Deposits at the Anarak Section,Central Iran     

Elaheh SATTARI  Ali BAHRAMI  Hossein VAZIRI-MOGHADDAM  Azizollah TAHERI  Iliana BONCHEVA 《《地质学报》英文版》2023,97(4):1038-1057

The Late Devonian–early Carboniferous deposits of the Anarak section in northeastern Isfahan, Central Iran, evaluated based on conodont biostratigraphy, sedimentary environment and sequence stratigraphy. According to the field observations, five lithological units were identified. Investigating the conodont fauna of the Late Devonian–Carboniferous(Mississippian–Pennsylvanian) deposits of Bahram, Shishtu, and Qaleh(Sardar 1) formations in Anarak section led to the identification of 67 species of ...  相似文献   

A new rating system approach for risk analysis of rock slopes     

Reza Nassirzadeh Goorchi  Mehdi Amini  Hossein Memarian 《Natural Hazards》2018,91(1):75-102

In this paper, an approach is presented to analyze the stability risk of rock slopes based on a new rating system. Three factors are used to estimate the risk level of rock slopes: (1) failure probability, (2) element at risk rating, and (3) vulnerability rating. Element at risk and vulnerability ratings are both given a range from 0 to 10, and the probability of failure is varied between 0 and 1, so the risk rating ranges between 0 and 100. This risk rating can be used to determine both the quantitative and qualitative risk levels of slopes at the same time. The method is tested on the western sector of the slopes facing Songun copper plant phase III, Iran, to clarify its procedures and assess its validity. Deterministic kinematic analyses showed that the slope has a potential for circular failure. Risk assessments revealed that the risk levels of the slope in both static and pseudo-static conditions are “very low” and “high,” respectively.  相似文献   

Porosity/(SiO<Subscript>2</Subscript> and Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Particles) Ratio Controlling Compressive Strength of Zeolite-Cemented Sands     

Hossein Mola-Abasi  Aghileh Khajeh  Safoura Naderi Semsani Semsani 《Geotechnical and Geological Engineering》2018,36(2):949-958

  相似文献   

A Critical Review on Filter Design Criteria for Dispersive Base Soils     

Amir Hossein Vakili  Mohamad Razip bin Selamat  Parsa Mohajeri  Hossein Moayedi 《Geotechnical and Geological Engineering》2018,36(4):1933-1951

Dispersive soils have become common materials for the construction industry. Highly susceptible to internal erosion and piping, dispersive soils must only be used with specific engineering measure in order to avoid failures that were often catastrophic. In an earth dam, clayey soils are used for the core and sandy materials are used for the filter to retain the eroded core soils and prevent their migration. In the absence of first-rate core material, dispersive soils have been used instead. This paper provides a review of the current knowledge and experiences regarding filtration of core soils, particularly the dispersive ones. The engineering problems associated with the use of dispersive soils are discussed and significant findings from previous studies on protective filters are summarized. It is worthy to note that the current review considers both, the conventional, rather empirical filter design criteria based on particle sizes and the current, quite theoretical state-of-the-art filter design criteria based on constriction sizes, with discussion given on the advantages and disadvantages of both. The information provided by this review should be handy for the study, design, construction, and operation of related geotechnical and geo-environmental projects.  相似文献   

A Risk-Based Technique to Analyze Flyrock Results Through Rock Engineering System     

Mahdi Hasanipanah  Danial Jahed Armaghani  Hassan Bakhshandeh Amnieh  Mohammadreza Koopialipoor  Hossein Arab 《Geotechnical and Geological Engineering》2018,36(4):2247-2260

Flyrock is an adverse effect produced by blasting in open-pit mines and tunneling projects. So, it seems that the precise estimations and risk level assessment of flyrock are essential in minimizing environmental effects induced by blasting. The first aim of this research is to model the risk level associated with flyrock through rock engineering systems (RES) methodology. In this regard, 62 blasting were investigated in Ulu Tiram quarry, Malaysia, and the most effective parameters of flyrock were measured. Using the most influential parameters on flyrock, the overall risk of flyrock was obtained as 32.95 which is considered as low to medium degree of vulnerability. Moreover, the second aim of this research is to estimate flyrock based on RES and multiple linear regression (MLR). To evaluate performance prediction of the models, some statistical criteria such as coefficient of determination (R²) were computed. Comparing the values predicted by the models demonstrated that the RES has more suitable performance than MLR for predicting the flyrock and it could be introduced as a powerful technique in this field.  相似文献   

Estimation of depth of buried conductive sphere from electromagnetic induction anomaly data using linearization process     

Mojtaba Babaei  Mirsattar Meshinchi-Asl  Hossein Zomorrodian 《Arabian Journal of Geosciences》2014,7(6):2363-2366

In this paper, we have developed a least-squares minimization method to estimate the depth of a buried conducting sphere using electromagnetic induction (EMI) data. This approach is basically based on the solving a set of algebraic linear equations to estimate the depth of sphere embedded in an insulating media. In electromagnetic induction method, the transmitter coil produces the incident magnetic and electric fields that obey the Maxwell’s equations. In the receiver coil, the received response is created in two modes—eddy-current mode (V _ec) derived from the perfectly conductor placed in the shallow depth and another mode called current-channeling response (V _cc) which depends on the conductivity of the medium. As expected, these responses differ depending on the direction of the incident field related to the receiver coil’s axis. In our case, the transmitter coil’s axis is parallel to the ground surface, and only the eddy-current response is measured in the receiver coil. The validity of this new method is demonstrated through studying and analyzing synthetic EMI anomalies, using simulated data generated from a known model with different random error components and a known statistical distribution.  相似文献   

Modeling Bromide Transport in Undisturbed Soil Columns with the Continuous Time Random Walk     

Shahram Shahmohammadi-Kalalagh  Hossein Beyrami 《Geotechnical and Geological Engineering》2015,33(6):1511-1518

  相似文献   

Calculation of the structural properties of asymmetrical nuclear matter     

Gholam Hossein Bordbar  Hamideh Nadgaran 《天体物理学报》2012,(3):345-358

  相似文献   

Video monitoring of in-channel wood: From flux characterization and prediction to recommendations to equip stations     

Zhi Zhang  Hossein Ghaffarian  Bruce MacVicar  Lise Vaudor  Aurélie Antonio  Kristell Michel  Hervé Piégay 《地球表面变化过程与地形》2021,46(4):822-836

Wood flux (piece number per time interval) is a key parameter for understanding wood budgeting, determining the controlling factors, and managing flood risk in a river basin. Quantitative wood flux data is critically needed to improve the understanding of wood dynamics and estimate wood discharge in rivers. In this study, the streamside videography technique was applied to detect wood passage and measure instantaneous rates of wood transport. The goal was to better understand how wood flux responds to flood and wind events and then predict wood flux. In total, one exceptional wind and seven flood events were monitored on the Ain River, France, and around 24,000 wood pieces were detected visually. It is confirmed that, in general, there is a threshold of wood motion in the river equal to 60% of bankfull discharge. However, in a flood following a windy day, no obvious threshold for wood motion was observed, which confirms that wind is important for the preparation of wood for transport between floods. In two multi-peak floods, around two-thirds of the total amount of wood was delivered on the first peak, which confirms the importance of the time between floods for predicting wood fluxes. Moreover, we found an empirical relation between wood frequency and wood discharge, which is used to estimate the total wood amount produced by each of the floods. The data set is then used to develop a random forest regression model to predict wood frequency as a function of three input variables that are derived from the flow hydrograph. The model calculates the total wood volume either during day or night based on the video monitoring technique for the first time, which expands its utility for wood budgeting in a watershed. A one-to-one link is then established between the fraction of detected pieces of wood and the dimensionless parameter “passing time × frame rate ”, which provides a general guideline for the design of monitoring stations.  相似文献   

Isospin violation in the d(n,γ)~3 H process at energies relevant for big bang nucleosynthesis     

Hossein Sadeghi  Hassan Khalili  Mojtaba Godarzi 《中国天文和天体物理学报》2014,(3):357-366

The cross section for a neutron-deuteron(nd) radiative capture is calculated using the pionless effective field theory including isospin symmetry breaking(ISB) corrections up to higher order.The triton is studied as a three-body bound state and one has to take into account various ISB effects,relativistic corrections and external electromagnetic currents.The isospin violation in nd radiative capture is improved compared to the one at NLO and N2LO.The cross section is determined to beσtot= [0.505 ± 0.003] mb up to N2LO.A satisfactory agreement between theory and experiment for the calculated cross section has been found by insertion of three-body forces and ISB effects.  相似文献